Handsfree Calling (Via Bluetooth Only); Receiving A Call; Making A Call - Sony MEX-N5200BT Mode D'emploi

Handsfree Calling (via
BLUETOOTH only)
To use a cellular phone, connect it with this
unit. You can connect two cellular phones to
the unit. For details, see "Preparing a
BLUETOOTH Device" (page 7).

Receiving a Call

1
Press CALL when a call is received
with a ringtone.
The phone call starts.
Note
The ringtone and talker's voice are output only from
the front speakers.
To reject the call
Press and hold OFF for 1 second.
To end the call
Press CALL again.

Making a Call

You can make a call from the phonebook or
call history when a cellular phone
supporting PBAP (Phone Book Access
Profile) is connected.
When two cellular phones are connected to
the unit, select either phone.
From the phonebook
1
Press CALL.
When two cellular phones are connected
to the unit, rotate the control dial to
select either phone, then press it.
2
Rotate the control dial to select
[PHONE BOOK], then press it.
14
GB
3
Rotate the control dial to select an
initial from the initial list, then press
it.
4
Rotate the control dial to select a
name from the name list, then press
it.
5
Rotate the control dial to select a
number from the number list, then
press it.
The phone call starts.
From the call history
1
Press CALL.
When two cellular phones are connected
to the unit, rotate the control dial to
select either phone, then press it.
2
Rotate the control dial to select
[RECENT CALL], then press it.
A list of the call history appears.
3
Rotate the control dial to select a
name or phone number from the call
history, then press it.
The phone call starts.
By phone number input
1
Press CALL.
When two cellular phones are connected
to the unit, rotate the control dial to
select either phone, then press it.
2
Rotate the control dial to select [DIAL
NUMBER], then press it.
3
Rotate the control dial to enter the
phone number, and lastly select [ ]
(space), then press ENTER*.
The phone call starts.
* To move the digital indication, press /
(SEEK –/+).
Note
[_] appears instead of [#] on the display.
By redial
1
Press CALL.
When two cellular phones are connected
to the unit, rotate the control dial to
select either phone, then press it.