Messages - Sony MEX-N5300BT Mode D'emploi

Fm/mw/lw cd bluetooth
Masquer les pouces Voir aussi pour MEX-N5300BT:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

BLUETOOTH function cannot operate.
 Turn off the unit by pressing OFF for more
than 2 seconds, then turn the unit on
again.
No sound is output from the car speakers
during handsfree call.
 If the sound is output from the cellular
phone, set the cellular phone to output
the sound from the car speakers.
"Siri Eyes Free" is not activated.
 Perform the handsfree registration for an
iPhone that supports "Siri Eyes Free".
 Set the Siri function on the iPhone to on.
 Cancel the BLUETOOTH connection with
the iPhone and the unit, and reconnect.
"Sony | Music Center" operation
Application name is mismatched with the
actual application in "Sony | Music
Center".
 Launch the application again from the
"Sony | Music Center" application.
While running the "Sony | Music Center"
application via BLUETOOTH, the display
automatically switches to [BT AUDIO].
 The "Sony | Music Center" application or
BLUETOOTH function has failed.
 Run the application again.
The "Sony | Music Center" application is
automatically disconnected when the
display switches to [IPD].
 The "Sony | Music Center" application on
iPhone/iPod does not support iPod
playback.
– Change the source of the unit to other
than [IPD], then establish the "Sony |
Music Center" connection (page 16).
The "Sony | Music Center" connection is
automatically disconnected when the USB
mode of the unit is changed to
[ANDROID].
 The Android smartphone is not
supporting playback in Android mode.
– Set the USB mode of the unit to [MSC/
MTP], then establish the "Sony | Music
Center" connection (page 16).
30
GB

Messages

The following messages may appear or flash
during operation.
INVALID: The selected operation could be
invalid.
READ
 Wait until reading is complete and
playback starts automatically. This may
take some time depending on the file
organization.
(underscore): The character cannot be
displayed.
For CD playback:
CD ERROR
 Clean or insert the disc correctly, or make
sure the disc is not blank or defective.
CD NO DISC
 Insert a disc containing playable files
(page 24).
CD NO MUSIC
 Insert a disc containing playable files
(page 24).
CD PUSH EJT: The disc could not be ejected
properly.
 Press  (eject).
or
: The beginning or the end
of the disc has been reached.
For USB device playback:
HUB NO SUPRT: USB hubs are not
supported.
IPD STOP: iPod playback has finished.
 Operate your iPod/iPhone to start
playback.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mex-n4300bt

Table des Matières