Tait TM8100 Guide De L'utilisateur page 17

Radio indicators
All manuals and user guides at all-guides.com
The LED indicators and the radio's audible tones all combine
to give you information about the state of your radio.
Although the way these indicators behave is affected by the
way your radio is programmed, the following sections
describe the most common operation of the radio indicators.
LED Indicators
LED
red
(transmit)
green
(receive and
monitor)
amber
(scanning)
function
key LEDs
Audible tones
Tone type
one short beep
after the power-
up beeps
two short beeps radio turned on: the radio is powered on
12 Getting started
Meaning
glowing: your radio is transmitting
flashing: your transmit timer is about to expire
glowing: there is activity on the current channel, even
though you may not be able to hear it
flashing: you have received a call with valid special
signalling, or you have activated monitor or squelch
override
glowing: your radio is scanning a group of chan-
nels for activity
flashing: your radio has detected activity on a
channel, and has halted on this channel
the operation of these LEDs depends on the type of
function programmed for each function key
Note: Refer to page page 18 for a description of other
audible tones.
Meaning
radio locked: you need to enter your PIN
(personal identity number) before you can
use the radio
and ready to use