Dogtra ARC800 FREE PLUS Guide D'utilisation page 44

Care for LCD Transmitters in Cold Temperature
In cold temperatures (-12°C or below), the Liquid Crystal
Display (LCD) on your transmitter may be dim or slow to
respond. Wait until the display becomes visible before
selecting any training level. Even though the LCD screen
might be dim or slow to respond when you press the
Nick or Constant button, the transmitter will still function
properly. In the occurrence of extremely cold weather,
the LCD screen might take a moment to respond causing
the intensity level to freeze at that current level. If you
turn the Rheostat Dial, the level on the screen may not
change but the actual intensity from the receiver will
change in agreement with the dial. In this situation, it
is ideal to either wait until your transmitter is back in
working order before emitting a correction or while
holding the Constant button down, slowly turn the
Rheostat Dial while watching your dog's reaction. Do not
turn the Rheostat Dial rapidly, because the receiver will
emit a static correction based on the level of the Rheostat
Dial, which might not be correctly reflected on the LCD
screen.
84
11. ATTACHING THE BELT CLIP
Follow the instructions below to attach the included belt
clip to the transmitter.
1. Align the belt clip to the grooves on the back of the
transmitter.
2. With a firm grip, screw on the belt clip's Phillips head
screws with a screwdriver.
Caution!
Tighten until firmly in place. Be careful not to over
tighten.
85