Dogtra ARC800 FREE PLUS Guide D'utilisation page 33

Setting up Boosted Constant feature
Rheostat
Dial
LCD Screen
LED
Indicator
Light
Boosted
Constant
Rheostat
Dial
LCD Screen
62
1. Set the stimulation level
to zero.
2. Hold the Boosted
Constant button for 5
seconds until the LED
light blinks; then release
it.
3. Turn the Rheostat
Dial to select the
incremental Boost
amount as shown on
the LCD screen.
Note: Set the Boost level
to 0 to use the Constant
stimulation without Boost.
4. Tap the Boosted
Constant button to
save the setting.
Note: The saved setting
will remain even if the unit
Boosted is turned off. To reset the
setting, repeat the steps
Constant
above.
63