Dogtra ARC800 FREE PLUS Guide D'utilisation page 34

3. ARC800 FREE PLUS CODE SETTING
Follow the steps below to code an ARC800 FREE PLUS
transmitter to a new or existing additional receiver.
Coding the transmitter and receiver:
Rheostat Dial
•D1
•D2
LCD Screen
On/Off
Magnetic
Red Dot
64
1. Set 1D or 2D using the
Toggle Switch on the
transmitter and dial to
set the stimulus level
to '0'.
2. With the receiver
turned off, place
the red dot on the
transmitter to the red
dot on the receiver.
Hold together until
the green LED
blinks rapidly on the
receiver.
Nick
Button
Constant
Button
3. Pressing 'Nick Button'
and 'Constant Button'
on the transmitter
when the receiver's
LED is blinking
4. LED flashes every 4
seconds after the LED
on the receiver is on,
connection complete
65