Publicité
Les langues disponibles
Les langues disponibles
Cleaning
CAUTION
Do not use:
•
•
•
Prevent water from entering the device. Do not immerse any part of the device
in water or other liquids.
It is recommended to clean the device after each use and prior to storage.
1.
Make sure the device is switched off and the plug is removed from the power outlet
(Figure 16, pos. 1).
2.
Carefully vacuum the openings to remove dust and dirt.
3.
Wipe the device with a damp, clean, soft, lint-free cloth or a soft brush.
4.
Let the device dry completely prior to use and storage.
Filter cleaning
In season when the device is used regularly, clean the filter every two weeks.
1.
Make sure the device is switched off and the
plug is removed from the power outlet
(Figure 16, pos. 1).
2.
Remove the hose connector from the hot air
outlet of the device (Figure 11).
3.
The device has two filters on the back. Open
both grills with a click system (Figure 17, pos.
1, 2) and remove the filters.
4.
Carefully vacuum the filters.
5.
The filters can be cleaned with lukewarm
clean water.
6.
Let the filters dry completely prior to
returning it to its place.
Never use the device without the filters.
Handle the temperature sensor (Figure 17, pos. 3) with care and make sure it is placed
properly before putting the filter (Figure 17, pos. 1) back.
End-of-season cleaning
1.
Completely remove the condensed water via the water discharge point.
2.
Run the device on the fan function for 2 hours.
3.
Switch off the device and remove the plug from the power outlet.
4.
Remove the hot air outlet hose from the device, clean and replace both filters.
5.
Remove the batteries from the remote control (Figure 14).
28
scouring pads;
hard brushes;
flammable, aggressive or chemical cleaning products.
Figure 17
Publicité
