EUROM PAC 9.3 Manuel De L'utilisateur page 23

3. Place the included window kit in the opening
of the window (Figure 9, pos. 2) use the top
part (Figure 9, pos. 1) to adjust to the height
of the window.
The window kit only works with a sliding window,
for other windows we recommend the EUROM
Cloth Window Kit.
4. Close the window (Figure 10, pos. 2) this will
hold the window kit in place.
5. Connect the window kit connector to the
window kit (Figure 10, pos. 1).
6. Connect the hose connector (Figure 11,
pos. 1) to the hot air outlet of the device
(Figure 11, pos. 2).
Avoid kinks or bends in the hot air outlet hose.
Figure 9
Figure 10
Figure 11
23