Publicité
Les langues disponibles
Les langues disponibles
Operation
WARNING
Before every use, make sure that:
•
•
•
•
•
•
1.
Make sure the device is correctly installed.
2.
Open the louvers by moving the handle up
(Figure 15, pos. 1). Make sure they are not
closed before use.
3.
Direct the wind to the left or right with the
second handle (Figure 15, pos. 2).
4.
Press the ON/OFF button on the device
(Figure 3, pos. 3) or the remote control
(Figure 4, pos. 7). The device will start in Fan
mode.
5.
Press the Mode button on the device
(Figure 3, pos. 4) or the Cool, Dehumidify or
Fan button on the remote control (Figure 4,
pos. 3, 4, 5) to select the desired mode.
6.
Fan mode
1.
Press the Speed button on the device (Figure 3, pos. 5) or the High or Low button on the
remote control (Figure 4, pos. 1, 10) to select the desired fan speed (Low-High).
Cooling mode
1.
Press the Up or Down button to set the required temperature (16 °C-32 °C).
2.
Press the Speed button on the device (Figure 3, pos. 5) or the High or Low button on the
remote control (Figure 4, pos. 1, 10) to select the desired fan speed (Low-High).
3.
The device will stop cooling when the ambient temperature is lower than the required
temperature.
Dehumidify mode
1.
Follow the instructions for 'Installation to dehumidify' before choosing this mode.
2.
Regularly check the water level in the bucket, the end of the hose should not be
immersed in water.
you operate the device with dry hands;
the device is clean and dry;
the device is not damaged;
the device is not covered or blocked;
the louvers are open;
the device stands securely and horizontally.
Figure 15
25
Publicité
