Avocent DSR 1020 Guide D'installation Et D'utilisation page 78

68 DSR® Switch Installer/User Guide
and periods (.) or create a name that consists entirely of digits. These are Active Directory
constraints.
NOTE: The factory default name in earlier versions contains a space that must be removed by editing the switching
system name in the Appliance Overview screen of the OBWI.
6. Create one or more groups under the group container organizational unit.
7. Add the usernames and target device and appliance objects to the groups you created in
step 5.
8. Specify the value of any attribute being used to implement the access control attribute. For
example, if you are using info as the attribute in the Access Control Attribute field and
using the Notes property in the group object to implement the access control attribute, the
value of the Notes attribute in Active Directory may be set to one of the three available
access levels (KVM User, KVM User Admin or KVM Appliance Admin) for the group
object. The members of the group may then access the appliances and target devices at the
specified access level.
NOTE: If none of the three values are found, the user is granted user level access to any appliance or target device
listed in a group with the username.
All manuals and user guides at all-guides.com