Télécharger Imprimer la page

Avocent DSR 1020 Guide D'installation Et D'utilisation page 110

Publicité

Les langues disponibles

Les langues disponibles

Appendix B: Using the DSR Remote Operations Software
NOTE: The DSR Remote Operations software uses the IPv4 protocol for communication, so the IPv4 protocol
must be enabled on the client server. The IPv6 protocol may also be active on the client server but has no impact
upon DSR Remote Operations.
The DSR Remote Operations software provides a subset of DSView 3 software and OBWI
functionality that allows access to a supported DSR switch when an Ethernet connection is not
available. For example, if you are in a branch office and your Ethernet network is down, you
may still access your remote server network by attaching a v.34, v.90 or v.92-compatible
modem to the modem port on a supported DSR switch for
flexible server management control from anywhere in the world.
The following operations are supported:
Establishing a KVM session to a target device connected to the switch
Controlling the power sockets of a power device attached to the DSR switch SPC port
Rebooting the switch
Retrieving and displaying the switch version
All other DSView 3 software and OBWI options (including using virtual media) are not
available when using the DSR Remote Operations software.
The following Video Viewer window commands are not available when using the DSR
Remote Operations software:
Displaying connected user information
Creating, editing, copying and deleting macros
NOTE: Only the default Windows and Sun macro groups are available when using the Remote Operations
software.
Refreshing the background
The DSR Remote Operations software uses an SSL-based connection to the DSR switch to
authenticate the user.
Figure B.1 illustrates how to use the DSR Remote Operations software with a DSR switch.
All manuals and user guides at all-guides.com
Appendices
access, administration and
KVM
100

Publicité

loading