Publicité
Les langues disponibles
Les langues disponibles
6. Click OK.
Configuring the DSView 3 server IP address
The DSView IP dialog box allows users to contact and register an unmanaged DSR switch with
a DSView 3 server by specifying the IP address of a DSView 3 server.
To configure the DSView 3 server IP address:
1. If the OSCAR interface is not open, press
2. Click Setup - DSView IP to open the DSView IP dialog box shown in Figure 3.13.
NOTE: If the DSR switch is already associated with a DSView 3 server, the following message will appear instead of
the DSView IP dialog box: Feature unavailable: This appliance is already being managed by a DSView 3 system.
3. Enter the DSView 3 software server IP address that you want to contact in the DSView
Server IP Address field.
4. Enter how often (in minutes) you want the DSR switch to attempt to contact the DSView 3
software server in the Retry Interval field.
5. Click OK.
Figure 3.13: OSCAR Interface DSView IP Dialog Box
Assigning device types
To access the OSCAR interface Devices dialog box:
1. If the OSCAR interface is not open, press
2. Click Setup - Devices to open the Devices dialog box shown in Figure 3.14.
NOTE: The Modify button is available only if a configurable switch is selected.
All manuals and user guides at all-guides.com
Chapter 3: Local Port Operation
to open the Main dialog box.
Print Screen
to open the Main dialog box.
Print Screen
35
Publicité
