Publicité
Les langues disponibles
Les langues disponibles
Figure 4.8: Active Directory - Define Groups
Setting up Active Directory for performing queries
Before you can use any of the querying modes for units, you must first make changes to Active
Directory so that the selected querying mode can assign the applicable authorization level for
the user.
To set up group queries:
1. Log into Windows with administrator privileges.
2. Open Active Directory software.
3. Create an organizational unit to be used as a group container.
4. Create a computer object in Active Directory with a name identical to the switching
system name for querying appliances (specified in the Appliance Overview screen of the
OBWI), or identical to the attached target devices for querying target devices. The name
must match exactly, including case.
5. The appliance names and target device names used for group queries are stored in the
appliance. The appliance name specified in the Appliance Overview screen of the OBWI
and target device names must identically match the object names in Active Directory. Each
appliance name and target device name may be comprised of any combination of upper-
case and lower-case letters (a-z, A-Z), digits (0-9) and hyphens (-). You cannot use spaces
All manuals and user guides at all-guides.com
Chapter 4: Web Interface Operations
67
Publicité
