Publicité
Les langues disponibles
Les langues disponibles
107
DSR® Switch Installer/User Guide
Power control of devices attached to power device sockets
NOTE: Users with User level account privileges cannot change the power state of power device sockets.
To control the power of a device attached to a power device socket:
1. Select View - Power from the menu or click Power in the side navigation bar. A list of
power device sockets attached to the switch will appear in the content area.
2. To power up a device attached to a power device socket, choose one of the following
actions:
•
Select a socket that has not been powered up and select Tools - Power On from the
menu bar.
•
Select a socket that has not been powered up and click the Power On toolbar button.
•
Right-click on a socket that has not been powered up and select Power On from the
shortcut menu.
The socket will power up and the icon for the socket in the content area will change.
3. To power down a device attached to a power device socket, choose one of the following
actions:
•
Select a socket that has not been powered down and select Tools - Power Off from the
menu bar.
•
Select a socket that has not been powered down and click the Power Off toolbar
button.
•
Right-click on a socket that has not been powered down and select Power Off from the
shortcut menu.
The socket will power down and the icon for the socket in the content area will
change.
4. To cycle the power of a device attached to a power device socket, choose one of the
following actions:
•
Select a socket that is powered up and select Tools - Cycle Power from the menu bar.
•
Select a socket that is powered up and click the Cycle Power toolbar button.
•
Right-click on a socket that is powered up and select Cycle Power from the shortcut
menu.
The socket will power down, then power up and the icon for the socket in the content
area will change accordingly.
All manuals and user guides at all-guides.com
Publicité
