Avocent DSR 1020 Guide D'installation Et D'utilisation page 51

All manuals and user guides at all-guides.com
Figure 3.19: OSCAR Interface User Status Dialog Box
To disconnect a user:
1. If the OSCAR interface is not open, press
2. Click Commands - User Status to open the User Status dialog box shown in Figure 3.19.
3. Click the letter corresponding to the user to disconnect. The Disconnect dialog box will
appear as shown in Figure 3.20.
Figure 3.20: OSCAR Interface Disconnect Dialog Box
4. Click OK to disconnect the user and return to the User Status dialog box.
-or-
Click X or press
Escape
Print Screen
to exit the dialog box without disconnecting a user.
Chapter 3: Local Port Operation
to open the Main dialog box.
41