Publicité
Les langues disponibles
Les langues disponibles
5. Click OK in the Devices dialog box to save settings.
NOTE: Changes made in the Device Modify dialog box are not saved until you click OK in the dialog box.
Assigning target device names
Use the Names dialog box to identify target devices by name rather than by port number. The
Names list is always sorted by port order. You can toggle between displaying the name or the
EID number of each IQ module, so even if you move the target device to another port, the
name and configuration will be recognized by the switch.
NOTE: When it is initially connected, a target device will not appear in the Names list until it is powered up. Once an
initial connection has been made, it will appear in the Names list even when powered down.
To access the OSCAR interface Names dialog box:
1. If the OSCAR interface is not open, press
2. Click Setup - Names to open the Names dialog box shown in Figure 3.16.
Figure 3.16: OSCAR Interface Names Dialog Box
NOTE: If new IQ modules are discovered by the DSR switch, the on-screen list will be automatically updated. The
mouse cursor will change into an hourglass during the update. No mouse or keyboard input will be accepted until
the list update is complete.
To assign names to target devices:
1. In the Names dialog box, select a target device name or port number and click Modify to
open the Name Modify dialog box shown in Figure 3.17.
All manuals and user guides at all-guides.com
Chapter 3: Local Port Operation
. The Main dialog box appears.
Print Screen
37
Publicité
