Avocent DSR 1020 Guide D'installation Et D'utilisation page 113

103 DSR® Switch Installer/User Guide
To install the DSR Remote Operations software:
1. Log on to the host system as administrator.
2. Download and open the DSR Remote Operations software. An installation options menu
appears.
NOTE: Visit www.avocent.com to download the DSR Remote Operations software.
3. Click Install DSR Remote Operation and follow the on-screen instructions.
Using the DSR Remote Operations software
To start the DSR Remote Operations software:
1. Establish a dial-up connection to the switch from the PC containing the DSR Remote
Operations software.
Windows displays a dialog box that prompts the user for a username and password
when a dial-up connection is established. It is not necessary to enter a username or
password in the dialog box. When this dialog box appears, click OK to close the
dialog box.
2. Once the connection has been established, select Start - Programs - Avocent DSView 3 -
DSR Remote Operations to start the DSR Remote Operations software on the PC. The
Login dialog box will appear. Log in using a valid username and password to establish a
DSR Remote Operations software session with the DSR switch over the modem link.
3. The switch will disconnect the modem connection if a user does not log in within the time
period specified by the authentication time-out value. The default authentication time-out
value (120 seconds) may be changed using the Terminal Applications menu.
The DSR switch will attempt to contact the DSView 3 software server to authenticate
the user. If the DSView 3 software server is unavailable, the switch will use its internal
database to authenticate the user.
4. Type the username and password to which you wish to connect and then click OK. If
authentication is successful, the DSR Remote Operations window will open.
NOTE: The switch will disconnect the modem connection if there is no activity on the modem connection for the
time period specified by the inactivity time-out value. The default inactivity time-out value (15 minutes) may be
changed using the Terminal Applications menu.
To exit the DSR Remote Operations software:
Select File - Exit from the menu.
All manuals and user guides at all-guides.com