Publicité
Les langues disponibles
Les langues disponibles
3. Use the drop-down windows to alter the desired settings.
4. Click the Save button to exit.
To view device details regarding the connected SPC device:
Select Appliance - Appliance Settings - Ports - Power Units - Settings from the DSR Explorer
window.
Configuring LDAP
LDAP is a vendor-independent protocol standard used for accessing, querying and updating a
directory using TCP/IP. Based on the X.500 Directory Services model, LDAP is a global
directory structure that supports strong security features including authentication, privacy and
integrity.
If individual user accounts are stored on an LDAP-enabled directory service, such as Active
Directory, you can use the directory service to authenticate users. The default values given for
the LDAP search and query parameters are defined for use with Active Directory.
The settings made in the on-board web interface let you configure your authentication
configuration parameters. The software sends the username, password and other information to
the appliance, which then determines whether the user has permission to view or change
configuration parameters for the appliance in the on-board web interface.
NOTE: Unless otherwise specified, the LDAP default values should be used unless Active Directory has been
reconfigured. Modifying the default values may cause LDAP authentication server communication errors.
LDAP Overview parameters
On the LDAP Overview page in the on-board web interface, you can configure the LDAP
authentication priority and the parameters that define LDAP server connection information.
LDAP authentication priority
In the LDAP Priority section of the on-board web interface, you can disable LDAP, or you can
set the authentication priority by choosing whether local authentication or LDAP
authentication should happen first.
To configure LDAP authentication priority parameters:
1. Select Appliance - Appliance Settings - User Accounts - LDAP Accounts - Overview.
2. Select either LDAP Disabled, LDAP before Local or LDAP after Local for the LDAP
Priority.
3. Click Save.
All manuals and user guides at all-guides.com
Chapter 4: Web Interface Operations
59
Publicité
