Publicité
Les langues disponibles
Les langues disponibles
112
DSR® Switch Installer/User Guide
finished entering the keystroke sequence that will activate the new macro, press the
key.
Arrow
4. On the line below the macro keystroke sequence you just entered, type the keystroke
sequence that you wish the macro to perform.
5. Repeat steps 3 and 4 to configure additional macros.
6. When finished, press
Using History mode
History mode allows you to examine the contents of the history buffer, which contains the
events that have occurred.
The serial IQ module maintains a buffer containing 240 lines minimum, or 10 screens, of
output. When the history buffer is full, it will add new lines at the bottom of the buffer and
delete the oldest lines at the top of the buffer.
NOTE: The Config Key Sequence, On-Line Key Sequence and Clear History Key Sequence used in the following
procedure are the default values. These key combinations can be changed using the Terminal Applications menu.
To use History mode:
1. Press
Ctrl-F9
2. Press one of the following key combinations to perform the indicated action:
•
Home
•
: Move to the bottom of the buffer.
End
•
Page Up
•
Page Down
•
Up Arrow
•
Down Arrow
•
Ctrl-F8
•
Ctrl-F9
mode enabled.
•
Ctrl-F10
mode enabled.
All manuals and user guides at all-guides.com
to return to the previous screen.
Enter
. The mode will display as History.
: Move to the top of the buffer.
: Move up one buffer page.
: Move down one buffer page.
: Move up one buffer line.
: Move down one buffer line.
: Enters Configuration mode. The Configuration screen will appear.
: While in Configuration mode, returns to the previous screen with History
: While in Configuration mode, returns to the previous screen with On-Line
Down
Publicité
