Stihl TS 480i Notice D'emploi page 25

13 Starting / Stopping the Engine
13 Starting / Stopping the
Engine
3
1
► Press throttle trigger lockout (1) and then
press throttle trigger (2)
► Hold both triggers down
► Set the stop switch (3) to F
► Release the throttle trigger, stop switch and
throttle trigger lockout in succession – starting
throttle position
0458-753-8221-D
3
2
► Press the button (4) of the decompression
valve
► Press the manual fuel pump bulb (5)
7‑10 times, even when the bulb is filled with
fuel
13.1 Starting
► Place the cut-off machine carefully on the
ground, ensuring that the abrasive wheel can‐
not touch the ground or any objects. There
must not be anyone within the swivel range of
the cut-off machine
► Make sure you have a firm footing
► Press the cut-off machine firmly against the
ground, holding the handle with your left hand,
thumb wrapped round the handle
► Press the cut-off machine against the ground
with the right knee on the shroud
English
4
5
25