Stihl TS 480i Notice D'emploi page 22

English
10 Mounting an Abrasive
Wheel
The engine must be switched off for fitting or
replacement – move stop switch to STOP or 0.
10.1 Blocking the shaft
► Slide the locking pin (1) through the bore in
the V-belt guard
► Turn the shaft with the combination wrench
until the locking pin (1) engages in the bore
behind the guard
22
1
10 Mounting an Abrasive Wheel
10.2 Removing an abrasive wheel
► Use the combination wrench to loosen and
remove the hexagon head screw (2)
► Remove the front thrust washer (3) from the
shaft together with the abrasive wheel
10.3 Fitting an abrasive wheel
► Fit the new abrasive wheel (4)
2
4
0458-753-8221-D