Télécharger Imprimer la page

ZANKER KOB10301 Notice D'utilisation page 12

Publicité

Les langues disponibles

Les langues disponibles

What to do if...
Problem
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
Steam and condensation settle on
the food and in the cavity of the
oven.
Service data
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of the
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Installation
Warning! Refer to Safety chapters.
12
Possible cause
The oven is deactivated.
The fuse is released.
The lamp is defective.
You left the dish in the oven for too
long.
We recommend that you write the data here:
Activate the oven.
Make sure that the fuse is the cause
of the malfunction. If the fuse relea-
ses again and again, contact a
qualified electrician.
Replace the lamp.
Do not leave the dishes in the oven
for longer than 15 - 20 minutes after
the cooking process ends.
appliance cavity. Do not remove the rating plate from
the appliance cavity.
.........................................
.........................................
.........................................
Remedy

Publicité

loading