Dynamic Cooking Systems DS Serie Manuel D'utilisation Et D'entretien page 21

Using The Rotisse rie Bu rne r
Open the lid. Push and turn the control knob to the "Lite" position. Press the safety valve button, hold
in, and begin turning the rotary igniter button located next to the rotis knob. It may be necessary to
turn the igniter knob several times until the burner lights. You'll hear a snapping sound. At the same
time, a spark will be provided at the safety probe. Hold the safety valve button in for about 5 seconds
or until the burner remains lit. This is the only burner on the grill with a safety valve. Once lit, turn
control knob to desired setting. If the burner does not light within 4 seconds, release the safety valve
button and turn the control knob to "off". If the igniter does not function, the burner can be lit by
holding a lit match to the burner (with the control knob at "Lite" and the safety valve button pressed).
• If relighting a hot burner, wait 5 minutes.
• Never leave the control knob on if rotis is not in use..
• Never light a grill burner under the rotis, while rotisserie burner is lit.
WARNING: Electrical Grounding Instructions:
This appliance (rotisserie motor) is equipped with a three-prong (grounding) plug for your protection
against shock hazard and should be plugged directly into a properly grounded three-prong receptacle.
Do not cut or remove the grounding prong from this plug.
The Rotisserie motor must be electrically grounded in accordance with local codes or, in the absence
of local codes, with the National Electrical Code, ANSI/NFPA 70-1990. Keep the rotis motor electric
cord away from the heated surfaces of the grill. When not in use, remove and store the motor in a
dry location.
20