Restoring The Factory Settings - Daikin RoCon UFH Manuel D'installation Et De Fonctionnement

7.4.7

Restoring the factory settings

A "Reset" restores the factory settings.
- Time and date are not reset.
1. Hold down the Menu key and the Set key simultaneously for 10 seconds.
- The display shows "Reset".
- The factory settings are restored.
Parameter
t-1
t-2
t-3 to t-9
Interval function
Additional pump running time Switch-on duration
Table 7-4: Factory settings timer module
Operation
RoCon UFH
Function
Start time
End time
Start weekday
End weekday
Switching channel "Timer1" Active
Switching channel "Timer2" Active
Start time
End time
Start weekday
End weekday
Switching channel "Timer1" Active
Switching channel "Timer2" Active
Start time
End time
Start weekday
End weekday
Switching channel "Timer1" Inactive
Switching channel "Timer2" Inactive
Time
Duration of interval
Weekday
Default value
22.00 (10:00 p.m.)
05.00 (05:00 a.m.)
1
5
23.00 (11:00 p.m.)
06.00 (06:00 a.m.)
6
7
0.00 (midnight)
0.00 (midnight)
0
0
1.00 (1:00 a.m.)
5 minutes
3 (Wednesday)
0 minutes
EN
58