Daikin RoCon UFH Manuel D'installation Et De Fonctionnement page 55

The menu Switching Channels consists of 2 screens. After you confirm the last
setting in screen 1, the product automatically switches to screen 2:
Fig. 7-14: Programming switching times
To disable a memory block, the switching channels "Timer1" and "Timer2" must
be inactive. The symbol "Timer" (I) flashes when both switching channels are inac-
tive.
RoCon UFH
Operation
A. Memory block indicator t-1 to t-9
B. Start time (format: 24 h)
C. End time (format: 24 h)
D. Indicator Menu active
E. Start weekday (1: Mon – 7: Sun)
F. End weekday (1: Mon – 7: Sun)
G. Switching channel "Timer2" active
H. Switching channel "Timer1" active
I. Timer mode active
EN
53