Toro TimeCutter MX 4275T Manuel De L'utilisateur page 40

Fuel System
Maintenance
DANGER
In certain conditions, fuel is extremely
flammable and highly explosive. A fire or
explosion from fuel can burn you and others
and can damage property.
Refer to Fuel Safety (page 13)
list of fuel related precautions.
Replacing the In-Line Fuel
Filter
Service Interval: Every 100 hours—Replace the
in-line fuel filter.
Never install a dirty filter after removing it from the
fuel line.
1. Park the machine on a level surface, disengage
the blade-control switch, and move the
motion-control levers outward to the P
position.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position. Allow the engine to cool.
3. Replace the filter
Note:
Ensure that the flow-direction arrow on
the replacement filter points toward the engine.
for a complete
ARK
(Figure 48).
38
Figure 48
g365941
g027518