Quick Guide To The Application Of Chemical Products; Recycling And The Environment - Balboa TP600 Manuel D'utilisation

RECYCLING AND THE ENVIRONMENT

In order to produce ozone, some Spas have an ozonator which, with electricity, can produce ions
of ozone from atmospheric oxygen. This process occurs automatically, and the product generated
is injected via the filtration return nozzles. Thus, it is not necessary for the user to activate any
mechanism for its generation.
The water is collected by the overflow, the drains or the skimmer, due to the suction of the filter
pump.
Then it passes through the heat exchanger and in its outlet it is injected with ozone. The water is
distributed via the filtration return system.
Ozone treatment does not exclude the use of other chemical products such as Bromine or Chlorine.
The ozone is considered as a complementary process to the ones above, thus reducing the
consumption of Bromine or Chlorine.

5.7. QUICK GUIDE TO THE APPLICATION OF CHEMICAL PRODUCTS

pH Minor Spa
pH Major Spa
Bromide tablets
Anticalcareous
Spa Algaecide
Degreaser
Antifoam
6. RECYCLING AND THE ENVIRONMENT
The Spa includes electric and/or electronic material, which at the end of its life-span, should be
suitably treated as special waste.
Contact your local authorities to find out the collection and waste disposal procedure for electric
and electronic material.
40 Spa for private use - Operating instructions
Reason for Use
Add if the pH level is above
acceptable levels (7.2-7.6 ppm).
Add if the pH level is below
acceptable levels (7.2-7.6 ppm).
Add if the Br level is above
acceptable values (3-5 ppm).
To prevent precipitation of
calcium salts (scale).
Prevents algae from growing in
the water.
To eliminate rings of dirt on the
walls of the Spa.
Foam in the water.
Amounts per m of water
3
Add following recommendations
of the chemical product
manufacturer.
Add following recommendations
of the chemical product
manufacturer.
Add following recommendations
of the chemical product
manufacturer.
Add following recommendations
of the chemical product
manufacturer.
Add following recommendations
of the chemical products
manufacturer.
Rub with a sponge and
immediately rinse with
abundant water.
Add following
recommendations of the
chemical product manufacturer.
Frequency of use
Analyse the pH daily with the
pH Test.
Analyse the pH daily with the
pH Test.
Analyse the Br daily with the Br
Test.
Once a week and whenever the
water is renewed.
Once a week and whenever the
water is renewed.
Whenever dirt is observed on
the walls of the Spa.
Whenever foam appears in the
water.