Control System For Tp800; Start-Up; The Main Screen; The Settings Screen - Balboa TP600 Manuel D'utilisation

HOW TO USE YOUR SPA

3.3. CONTROL SYSTEM FOR TP800

(This section is only for spas equipped with this control system)

3.3.1. START-UP

Fill the spa to its correct operating level. Be sure to open all valves and jets in the plumbing system
before filling to allow as much air as possible to escape from the plumbing and the control system
during the filling process.
After turning the power on at the main power panel, the top-side panel will display a splash screen
or startup screen.

3.3.2. THE MAIN SCREEN

ICON Specifications

3.3.3. THE SETTINGS SCREEN

Programming, Etc.
The Settings Screen is where all programming and other spa behaviors are controlled. This screen
has several features that can be acted on directly. These features include Temp Range, Heat Mode,
and Invert Panel. When one of these items is highlighted, the Select Button is used to toggle
between two settings. All other menu items (with an arrow pointing to the right) go to another
level in the menu.
14 Spa for private use - Operating instructions