Programmable Wifi Touch Panel; Start-Up; The Main Screen - Balboa TP600 Manuel D'utilisation

HOW TO USE YOUR SPA
Unlocking
An Unlock Sequence using the navigation buttons can be used from the Lock Screen. The Unlock
Sequence is the same for both Panel Lock and Settings Lock.

3.4. PROGRAMMABLE WIFI TOUCH PANEL

(This section is only for spas equipped with this control system

3.4.1. START-UP

Fill the spa to its correct operating level. Be sure to open all valves and jets in the plumbing system
before filling to allow as much air as possible to escape from the plumbing and the control system
during the filling process.
After turning the power on at the main power panel, the top-side panel will display a splash screen
or startup screen.

3.4.2. THE MAIN SCREEN

ICON Specifications
1.
= High Temperature Range.
2.
= Ready Mode.
3. = Filter1 Mode.
4. =Water Care (Ozone or UV, depending the system installed) is Running. If you don't see
the icon that means the Disinfection (Ozone or UV) is OFF
5. = Cleanup Cycle is Running. Note: Not all systems that can run a Cleanup Cycle display
this icon.
= Low Temperature Range.
= Ready And Rest Mode.
= Filter2 Mode. = Filter1 and 2 Mode.
= Rest Mode.
ENG
17