Safety In The Use Of Chemical Products; Important; Maintenance Schedule Of The Spa Water; Ph Adjustment - Balboa TP600 Manuel D'utilisation

MAINTENANCE OF THE WATER

5.1. SAFETY IN THE USE OF CHEMICAL PRODUCTS

Before using a chemical product, read the instructions on the product label carefully.
• It is advisable that always the same person handles the chemical products. Keep these products
away from children.
• Add the exact amounts to the water, as specified.
• Keep containers tightly closed in dry, well-ventilated places.
• Do not inhale chemical products, and take care not to let them come into contact with the eyes,
nose or mouth. Wash hands after use.
• Follow the emergency instructions on the product label in the event of an accident or ingestion.
• Do not smoke while handling these products – they may be flammable.
• Do not store these products inside the Spa unit.
• Do not mix products. Add first one and then the other to the water, to avoid possible reactions.
• Do not add chemical products to the water if there is someone in the Spa.

5.2. MAINTENANCE SCHEDULE OF THE SPA WATER

All chemical products: Bromine in tablet form, Algaecides, Anti-calcareous and pH reducer, must
be added to a floating dispenser (not supplied), with the massage pump on for at least ten minutes.

5.3. pH ADJUSTMENT

A pH index of between 7.2 and 7.6 is recommended.
The pH level measures the acidity and alkalinity: Values above 7 are alkali and below 7, are acid.
It is very important to maintain the correct pH level both for the disinfectant to work properly
and to prevent corrosion or deposits on the Spa. Any damage caused by an inadequate pH
• The effects of a very low pH level are:
- The disinfectant will quickly dissipate.
- The equipment of the Spa become rusty.
- The water can start causing skin irritations to bathers.
38 Spa for private use - Operating instructions

IMPORTANT

level is not covered by your Spa guarantee.