The Settings Screen - Balboa TP600 Manuel D'utilisation

HOW TO USE YOUR SPA ENG
15. Current water temperature.
16. Setting Icon. = Settings is Active. = Settings is Inactive (when a Lock is applied).
Takes you to Settings Screen.
Where the available specific features that can be adjusted for the control can be adjusted. The
same goes for the Utilities Screen and the Test Screen (used by Spa Technicians).
17. Indicates when the spa heater is on.
18. Adjust set temperature lower.
Note: After 30 minutes* the display will automatically go into sleep mode, which turns the display
off. This is normal operation. Touch anywhere on the screen to wake the panel up.

3.4.3. THE SETTINGS SCREEN

Programming
The Settings Screen is where all programming and other spa behaviors are controlled. Each icon
on the Settings screen takes you to a different screen, where one or more setting may be viewed
and/or edited.
The Heat Icon takes you to a screen where you control the Heat Mode and the Temperature
Range.
Dual Temperature Ranges (High vs. Low)
This system incorporates two temperature range settings with independent set temperatures. The
specific range can be selected on the Settings screen and is visible on the Main Screen in the upper
left corner of the display.
These ranges can be used for various reasons, with a common use being a "ready to use" setting
vs. a "vacation" setting.
19