Dibo SBH-G-D Mode D'emploi page 148

E N
C O M B U S T I O N C H A M B E R G A S H E AT E D I N S T R U C T I O N S - R E G U L AT I O N S
3.4 Extreme corrosion after a short period of operation
Reasons: The ventilator fan sucks in the exhaust gases of its own burner or the exhaust gases of extraneous fireplaces as
well as dusts of all kind, for example sanding dust, lacquer vapour, aggressive surrounding air, enriched by chlorine,
fluorine, metal dusts etc.; this starts the corrosion. The dusts adhere to the heating coil and the inner casing.
The dust particles have the effect of germ cells, causing corrosion starts.
Solution: Be careful to avoid the sucking in of exhaust gases and dust particles under all circumstance, take special care
during the installation of the combustion chamber.
3.5 The temperature limiting safety device always cuts off.
See page 27-28, item 3.1 to 3.2!
34. Firing automat
30
DiBO 52