Water Tank; Oil Drainage Hp- Pump; Oil Filling Hp- Pump; Carry Away Used Oil - Dibo SBH-G-D Mode D'emploi

E N
S E R V I C E
It is important that on the ignition transformer a load is connected. The
switching on of the ignition transformer without the ignition pins are connected,
are not permitted. We recommend during maintenance activities certainly
checking the connections of the ignition cables and for the case the burner
would not work, certainly don't let run the burner.
8

Water tank

Check the water tank on external damages and leaks. Check when the tank is
filling if the float system works properly.
9

Oil drainage HP- pump

• Put a oil trough under the drain plug.
• Remove the drain plug.
• Let all the oil in the oil trough.
• Assemble the drain plug (with a new packing ring).
10 Oil filling HP- pump
Remove the oil-level gauge. Flll the engine crankcase with oil until the oil-level
comes up to the middle of the gauge (type oil see technical data). Check the oil-
level on the basis of the marks on the oil-level gauge. Place back the oil- level
gauge.
11

Carry away used oil

Pour the tapped oil in a can. Deliver the tapped oil by your dealership or at the
proper authorities.
DiBO 22