Publicité
6.1
EN-18
System-specific parameters
Sets the time programs for a priority of
swimming pool water preparation
Sets the start time for the swimming pool
priority
Sets the desired number of hours for which
swimming pool priority should be given
For each day of the week, it is possible to select
whether a priority is desired at the set start
time.
The output of the auxiliary circulating pump can
be configured to allow parallel operation of the
auxiliary circulating pump and the heat pump's
compressor. Configuration is possible for
heating, domestic hot water preparation and
swimming pool water preparation. Frost
protection functions are ensured.
Should the auxiliary pump operate during
heating operation?
Should the auxiliary pump operate during
cooling operation?
Should the auxiliary pump operate during
domestic hot water preparation?
Should the auxiliary pump operate during
swimming pool water preparation?
Is it desirable that the heat circulating pump
switches on and off as required? If optimisation
is switched off (NO), the heat circulating pump
is run in continuous operation.
Sets the date, year, day, month and weekday
The language for menu navigation can be
selected from the available languages
Setting range
Display
Swimming pool
00:00
Swimming pool
...
23:59
1
Swimming pool
...
10
N
Swimming pool
Y
Always
No
Heating circuit 1
Yes
No
Active or passive
cooling
Yes
No
Domestic hot water
Yes
No
Swimming pool
Yes
Yes
Heating circuit 1
No
Always
DEUTSCH
Always
ENGLISH
FRANCAIS
ITALIANO
NEDERLAND
PORTUGUES
POLSKY
SVENSKA
SLOVENSKO
ESPANOL
CESKY
SUOMI
NORSK
DANSK
Publicité
Chapitres
