Clock Functions - ZANKER KOB25602XK Notice D'utilisation

Display
A
Buttons
Button

Clock functions

Clock functions table
Clock function
Time of day
Minute Minder
Duration
End
You can use the functions Duration
and End
time for how long the appliance should
operate and when the appliance should
deactivate. This lets you activate the
appliance with a delay in time. First set
the Duration
Setting the clock functions
For Duration and End
and temperature of cooking. This is not necessary for
the Minute Minder .
B C
Function
MINUS
CLOCK
PLUS
To set, change or check the time of day.
To set countdown time. This function has no effect on the operation of the appli-
ance.
To set the cooking time of the oven.
To set the time of day when the oven should deactivate.
at the same time to set the
and then the End
, set an oven function
A. Function indicators
B. Time display
C. Function indicator
To set the time.
To set a clock function.
To set the time.
Application
1. Press
necessary clock function starts to flash.
2. Press
clock function.
The clock function operates. The display shows the
indicator for the clock function you set.
For the Minute Minder function the
.
display shows the time left.
3. When the time ends the indicator of the clock
function flashes and an acoustic signal sounds.
Press a button to stop the signal.
4. Turn the knob for the oven functions and the knob
for the temperature to the off position.
Description
again and again until the indicator for the
or to set the time for the necessary
7