Clock Functions; Electronic Programmer - ZANKER KOB25602 Notice D'utilisation

Clock functions

Electronic programmer

1
5
Clock function
Time of day
Minute Minder
Duration
End
You can use Duration
same time to set the time when the appliance
must be activated and then deactivated. First set Dura-
tion , then End .
Setting the clock functions
1.
For Duration and End
tion and temperature. This is not necessary for the
Minute Minder
2. Press the Selection button again and again until
the indicator for the necessary clock function
flashes.
2 1
4 3
To set, change or check the time of day.
To set a countdown time. This function has no effect on the operation of the
oven.
To set how long the appliance must operate.
To set when the appliance must be deactivated.
and End at the
, set an oven func-
.
Function indicators
1
Time display
2
Button +
3
Selection button
4
Button -
5
Application
3. Press + or - to set the time for the necessary clock
function.
The display shows the indicator for the clock func-
tion you set. When the set time ends, the indicator
flashes and an acoustic signal sounds for two mi-
nutes.
With the Duration
appliance deactivates automatically.
4. Press a button to stop the signal.
and End functions, the
7