Troubleshooting; Troubleshooting Schedule; Transportation And Storage - Husqvarna PG 400 Petrol Manuel D'utilisation

Troubleshooting schedule

Problem
The product does not start.
The product is not easy to hold on to.
The product has sudden movements.
The product stops after a while.
The product stops again when you start it.
Transportation of the product
• Close the fuel valve. Refer to
page 12 .
• Safely attach the product during transport to prevent
damages and accidents.
• Put some type of protection on the product during
transportation. The protection keeps natural
elements such as rain and snow away from the
product.
• Always use the lifting eye that is attached to the
product when you lift and move the product.
16

Troubleshooting

Cause
The operator presence control is
not engaged.
There is no fuel in the fuel tank.
There is no oil in the oil tank.
Too small number of diamond
tools on grinding head.
The incorrect type of diamond
tools for the surface.
The diamond tools are not cor-
rectly installed.
The diamond tools have different
heights.
The height and weight adjust-
ment is not correct.
To high load.
Incorrect fuel tank cap. Refer to
different fuel tank caps on page
11 .

Transportation and storage

To start the product on
Possible solutions
Hold the operator presence con-
trol against the handlebar when
you pull the starter rope handle.
Fill the fuel tank with fuel. Refer
to
Fill the oil tank with oil. Refer to
To do a check of the oil level on
page 13 .
Use the correct number of dia-
mond tools. Refer to
tools on page 9 .
Make sure that all diamond tools
are installed correctly.
Make sure that all diamond tools
have the same height.
Make sure that the height and
weight adjustment are correct.
Refer to
height on page 8 and To adjust
the handlebar on page 8 .
Attach more diamond tools or
change to a harder bond.
2 Make sure to the fuel tank cap is
fully tightened when you operate
the product.
Speak to an approved service
center.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel tank before you put the product in
storage for a long period of time. Discard the fuel at
an applicable disposal location.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Keep the product in a dry and frost free area.
To set the product in transport position
• To set the product in transport position, refer to
adjust the frame height on page 8 .
To fill fuel on page 11 .
Diamond
To adjust the frame
883 - 002 - 10.09.2020
To