Husqvarna PG 400 Petrol Manuel D'utilisation page 10

Masquer les pouces Voir aussi pour PG 400 Petrol:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation of the diamond tools
The tool plate uses the RediLock
The installation of the diamond tools on the tool plate
has effect on the performance of the product. The
diamond tool type together with the number of segments
on the diamond tool is important. Always use
symmetrical sets of diamond tools to make sure that the
balance of the grinding head is correct.
Metal bond diamond tools with 1 diamond segment
increases the diamond tool pressure.
For the heaviest removal, we recommend tools that only
have 1 direction of rotation and PCD diamond tool tops.
Note: PCD diamond tools such as the brand Piranha
are made to operate in only 1 direction.
To replace the diamond tools
WARNING: Diamond tools can become very
hot. Use protective gloves.
1. Make sure that the engine is off and that the
operator presence control is not against the
handlebar.
10
Dovetail system.
2. Put the product into servicing position.
3. Use a hammer to remove the diamond tools.
4. Attach new diamond tools on the tool plate.
883 - 002 - 10.09.2020

Publicité

Table des Matières
loading

Table des Matières