General Safety Instructions - Scheppach DP16PRO Traduction De La Notice Originale

Safety instructions
m Caution! When using power tools, observe the
following basic safety measures for the prevention of
electric shocks and the risk of injury and fire.
Please read all these instructions before using this
electric tool and please keep the safety instructions.

General safety instructions

m Caution! When using power tools, observe the
following basic safety measures for the prevention of
electric shocks and the risk of injury and fire: There
is a risk of injury.
General Safety Instructions for Power Tools
m WARNING! Read all safety instructions and
guidelines carefully. Failure to follow the safety
instructions and guidelines may result in electric
shock, fire and/or serious injuries.
Save all safety instructions and guidelines for
the future.
The term „power tool" used in the safety instructions
refers to mains-operated electric tools (with a mains
cable) and to battery-operated electric tools (without
a mains cable).
Safe working
Keep your work area tidy
•
- An untidy workplace can lead to accidents.
Consider environment influences
•
- Do not expose power tools to rain.
- Do not use power tools in damp or wet surround-
ings.
- Ensure the work area is adequately lit.
- Do not use power tools where there is a fire or
explosion hazard.
Protect yourself against electric shock
•
- Avoid body contact with earthed parts (e.g.
pipes, radiators, electric cookers, refrigerators).
Keep other people away
•
- Do not allow other people, especially children, to
touch the power tool or cable. Keep them away
from your work area.
Store unused power tools safely
•
- Unused power tools should be stored in a dry,
high or locked place, out of the reach of children.
Do not overload your power tool
•
- You work better and more safely within the spec-
ified power range.
Use the correct power tool
•
- Do not use low-performance machines for heavy
work.
- Do not use the power tool for purposes for which
it is not intended. For example, do not use a cir-
cular hand saw for cutting tree branches or logs.
Wear suitable clothing
•
- Do not wear loose clothing or jewellery that
might become caught in moving parts.
- When working outdoors, non-slip footwear is
recommended.
- Wear a hair net to contain long hair.
20 / GB
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
All manuals and user guides at all-guides.com
Use protective equipment
•
- Wear safety goggles.
- Use a breathing mask for work which generates
dust.
Connect a dust extraction device
•
- If connections are available for dust extraction
and collection devices, make sure that these
are connected and properly used.
Do not use the cable for purposes for which it
•
is not intended
- Do not use the cable to pull the plug from the
socket.
- Protect the cable from heat, oil and sharp edg-
es.
Secure the workpiece
•
- Use jigs or a vice to hold the workpiece securely.
This is safer than using your hand.
Avoid abnormal body postures
•
- Ensure secure footing and keep your balance at
all times.
Maintain tools with care
•
- Keep cutting tools sharp and clean for better and
safer working.
- Follow the instructions for lubrication and chang-
ing tools.
- Regularly check the connection cable of the
power tool and, if it is damaged, have it replaced
by a qualified specialist.
- Check extension cords periodically and replace
them if they are damaged.
- Keep handles dry, clean and free from oil and
grease.
Remove the plug from the mains socket
•
- When the power tool is not in use, before main-
tenance and when changing tools such as saw
blades, drill bits, cutters.
Do not allow any tool keys to remain inserted.
•
- Check, before switching on, that keys and adjust-
ing tools have been removed.
Avoid unintentional starting
•
- Make sure that the switch is off when inserting
the plug into the socket.
Use extension cables outdoors
•
- Only use approved and appropriately marked ex-
tension cables outdoors.
Pay attention at all times
•
- Pay attention to what you are doing. Work using
common sense. Do not use the power tool if you
cannot concentrate.
Check the power tool for possible damage
•
- Before further use of the power tool, safety de-
vices or slightly damaged parts must be carefully
examined in respect of their proper and intended
function.
- Check that the moving parts are working prop-
erly and are not jammed or whether parts are
damaged. All parts must be correctly fitted and
satisfy all conditions to ensure the proper opera-
tion of the power tool.
- Damaged safety equipment and parts must be
repaired properly or replaced by an authorised