Ryobi RY36LMM46A Mode D'emploi page 5

■ Do not tilt the product when turning on the motor or
while the motor is running. If absolutely necessary, raise
the front of the lawnmower by no more than 5 cm to
enable easy starting. Press down on the handlebar to
achieve this. Always return the lawnmower to its normal
position with all wheels on the ground before cutting.
Tilting the lawnmower exposes the blade and increases
the probability of objects being thrown and accidentally
making contact with the blade.
■ Turn off the product, and remove the isolator key and the
battery pack. Make sure that all moving parts have come
to a complete stop:
● whenever leaving the product unattended (including
disposal of grass clippings)
● before clearing blockages or unclogging the
discharge chute
● before checking, cleaning, or working on the product
● before removing the grass catcher or opening the
grass discharge chute cover
● after striking a foreign object; inspect the product
for damage and make repairs as necessary before
restarting and operating the product
● if the product starts to vibrate abnormally (check
immediately)
inspect for damage, particularly the blades
–
replace or repair any damaged parts
–
check for and tighten any loose parts
–
■ Always ensure that the motor control cable is never
trapped, pinched, or otherwise damaged during
assembly or when folding the handle. Never apply power
to the product if this cable is damaged. Have the product
serviced by an authorised service centre only.
■ Injuries may be caused, or aggravated, by prolonged use
of the product. When using the product for prolonged
periods, ensure to take regular breaks.
■ Operate the product only in temperatures between 0°C
and 40°C.
ADDITIONAL BATTERY SAFETY WARNINGS
■ To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse the tool,
battery pack, or charger in fluid or allow fluid to flow
inside them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and bleach or
bleach-containing products, etc., can cause a short
circuit.
■ Charge the battery pack in a location where the ambient
temperature is between 10°C and 38°C.
■ Store the battery pack in a location where the ambient
temperature is between 0°C and 20°C.
■ Use the battery pack in a location where the ambient
temperature is between 0°C and 40°C.
PRODUCT FEATURES
OVERHEAT PROTECTION
The battery pack has overheat protection. Excessive
temperatures will cause the battery to stop powering the
product. If the battery pack is too warm, allow it to cool down
before resuming operation. If the product still does not work,
recharge the battery.
NOTE: The battery pack LED indicator will not work if the
battery protection feature has caused the battery pack to
stop powering the product. Turn off the product or remove
the battery pack from the product, and the battery pack LED
indicator will resume normal function.
GENERAL MOWING TIPS
The run time of the battery depends on the condition, length,
and density of the grass.
Adjust the cutting height of the lawnmower to suit the current
condition of the lawn.
■ For best performance, always cut off one-third or less of
the total height of the grass.
■ When cutting long grass, reduce walking speed to allow for
more effective cutting and a proper discharge of the clippings.
■ A higher cutting height extends the run time of the
battery pack.
■ If frequent stalling occurs, adjust to a higher cutting
height or reduce walking speed.
TRANSPORTATION AND STORAGE
■ Turn off the product, and remove the isolator key and
the battery pack. Make sure that all moving parts have
come to a complete stop. Allow the product to cool down
before storing or transporting.
■ Remove all foreign materials from the product. Store the
product in a cool, dry, and well-ventilated place that is
inaccessible to children. Keep the product away from
corrosive agents, such as garden chemicals and de-
icing salts. Do not store the product outdoors.
■ Store the product in a location where the ambient
temperature is between 0°C and 40°C.
■ Use extreme caution when lifting or tilting the product for
maintenance, cleaning, storage, or transportation. The
blade is sharp; keep all body parts away from the blade
while it is exposed.
■ For transportation in vehicles, remove the isolator key and the
battery pack, and secure the product against movement or
falling to prevent injury to persons or damage to the product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or
tape. Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.
MAINTENANCE
■ Use only original manufacturer's replacement parts,
accessories, and attachments. Failure to do so can cause
possible injury, can contribute to poor performance, and
may void your warranty.
■ Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. Have
the product serviced by an authorised service centre only.
■ You may make adjustments and repairs described in this
manual. For other repairs, have the product serviced by
an authorised service centre only.
5
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR