Table des Matières
Publicité
CANOpy INSTALLATION
1
Using an 80-grit sand paper go over the canopy frame and rough the contact
location with the canopy for good adhesion. Also sand down any high spots
at the seams or anywhere else to be smooth and flush with the surrounding
area. Use acetone and clean the surfaces,
76
All manuals and user guides at all-guides.com
2
Carefully cut the edges of the canopy.
Note: Canopy gets scratched easily, be careful while cutting and moving the
canopy.
3
Using 2" masking tape or mask paper, mask the entire canopy.
Publicité
Table des Matières
