Table des Matières
Publicité
aileron serVo tray installation •
16
Mix finishing epoxy resin and brush it on the tray bracket then lay the fiber-
glass cloth and let it get wet. Work the fiberglass cloth for a tight fit..
18
All manuals and user guides at all-guides.com
17
Using a brush, apply some resin on top of the cloth..
18
Use the back of a hobby knife and push the fiberglass cloth in the corners to
make sure cloth adheres properly with no gap or bubble to the servo tray sup-
port. Following the same method do the right side of the servo tray support.
Publicité
Table des Matières
