Sound Values And Vibration Values - Stihl FSA 130 Notice D'emploi

English
– Weight without cutting attachment and deflec‐
tor: 4.5 kg
– Length without cutting attachment: 1750 mm
For battery life see www.stihl.com/battery-life.
19.2 Sound Values and Vibration
Values
The K-value for sound pressure levels is 2 dB(A).
K-value for sound power levels is 2 dB(A). The
K-value for vibration level is 2 m/s².
STIHL recommends wearing ear defenders.
Using with a mowing head except PolyCut 28-2
– Sound pressure level L
to EN 50636‑2‑91: 83 dB(A)
– Sound power level L
EN 50636-2-91: 94 dB(A)
– Vibration level a measured according to
hv
EN 50636-2-91
– Control handle: 1.1 m/s²
– Left handle: 1.9 m/s²
Using with a mowing head PolyCut 28-2
– Sound pressure level L
to EN 50636‑2‑91: 84 dB(A)
– Sound power level L
EN 50636-2-91: 97 dB(A)
– Vibration level a measured according to
hv
EN 50636-2-91
– Control handle: 1.1 m/s²
– Left handle: 1.9 m/s²
20 Combinations of Cutting Attachments, Deflectors and Carrying
Systems
20.1 Combinations of Cutting Attachments, Deflectors and Carrying Systems
Cutting attachment
– PolyCut 28-2
Mowing head with 2.4 mm diame‐
ter "round, silent" mowing line:
– AutoCut 25-2 mowing head
– AutoCut 27-2 mowing head
– AutoCut C 26-2 mowing head
– DuroCut 20-2 mowing head
– SuperCut mowing head 20-2
– TrimCut 31-2 mowing head
Mowing head with 2.7 mm diame‐
ter "round, silent" mowing line:
– AutoCut 36-2 mowing head
– FixCut 31-2 mowing head
– Grass cutting blade 230-2
(230 mm dia.)
– Grass cutting blade 230-4
(230 mm dia.)
42
20 Combinations of Cutting Attachments, Deflectors and Carrying Syst...
measured according
pA
measured according to
wA
measured according
pA
measured according to
wA
Deflector
– Guard for mowing
heads
– Universal deflector
with skirt and line
limiting blade
– Universal deflector
without skirt
Using with a metal cutting attachment
– Sound pressure level L
to EN 50636‑2‑91: 82 dB(A)
– Sound power level L
EN 50636-2-91: 94 dB(A)
– Vibration level a measured according to
hv
EN 50636-2-91
– Control handle: 2.0 m/s²
– Left handle: 2.9 m/s²
The vibration levels indicated were measured
according to a standardized test method and can
be used as a basis for comparing electric power
tools. The vibration levels actually occurring may
vary from the values indicated, depending on the
type of application. The vibration levels indicated
can be used for an initial estimate of the vibration
stress. The actual vibration stress has to be esti‐
mated. The times when the electric power tool is
switched off and the times when it is switched on
but running under no load can be taken into
account in the estimate.
For information on compliance with Employers'
Vibration Directive 2002/44/EC see
www.stihl.com/vib.
19.3 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
Carrying system
– STIHL AR battery with the support cus‐
hion
– Battery belt with attached "AP belt bag
with connecting cable" together with the
shoulder strap
– Battery belt with strap and attached "AP
belt bag with connecting cable" together
with the support cushion
– Carrying system with built-in "AP belt
bag with connecting cable" together with
the support cushion
measured according
pA
measured according to
wA
0458-726-9621-C