Specifications; Stihl Fsa 86 R Brushcutters; Stihl Ap Battery; Sound Values And Vibration Values - Stihl FSA 86 R Notice D'emploi

19 Specifications

19 Specifications

19.1 STIHL FSA 86 R Brushcutters

– Permitted batteries:
– STIHL AP
– STIHL AR
– Weight without battery, cutting tool and guard: 3.4 kg
– Length without cutting tool: 1,725 mm
The running time is shown at www.stihl.com/battery-life.

19.2 STIHL AP battery

– Battery Technology: Lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
– Permissible temperature range for operation and storage:
-10°C to +50°C

19.3 Sound Values and Vibration Values

K-value (uncertainty) for sound pressure levels is 2 dB(A).
K-value for sound power levels is 2 dB(A). K-value for
vibration level is 2 m/s².
STIHL recommends wearing ear defenders.
– Sound pressure level L
pA
EN 50636-2-91: 81 dB(A)
– Sound power level L
wA
EN 50636-2-91: 94 dB(A)
– Vibration level a measured as specified in EN 50636-2-
hv
91
– Control handle: 2.0 m/s².
– Loop handle: 3.7 m/s².
0458-833-9621-A
measured as specified in
measured as specified in
The vibration levels indicated were measured according to a
standardized test method and can be used as a basis for
comparing electric power tools. The vibration levels actually
occurring may vary from the values indicated, depending on
the type of application. The vibration levels indicated can be
used for an initial estimate of the vibration stress. The actual
vibration stress has to be estimated. The times when the
power tool is switched off and the times when it is switched
on but running under no load can be taken into account in
the estimate.
For information on compliance with Employers' Vibration
Directive 2002/44/EC see www.stihl.com/vib.

19.4 REACH

REACH is an EC regulation and stands for the Registration,
Evaluation, Authorisation and Restriction of Chemical
substances.
For information on compliance with the REACH regulation
see www.stihl.com/reach.
20 Combinations of Cutting Attachments
and Deflectors

20.1 STIHL FSA 86 R Brushcutters

The following mowing heads may be mounted together with
the guard for mowing heads:
– STIHL AutoCut C 6-2 mowing head:
– with round, low-noise mowing line with a diameter of 2.0
mm or 2.4 mm
– PolyCut 6-2 mowing head
– with blades
– with round, low-noise mowing line with a diameter of 2.0
mm or 2.4 mm
– DuroCut 5-2 mowing head:
– with blades
– with round, low-noise mowing line with a diameter of
1.6 mm, 2.0 mm or 2.4 mm
English
45