Deflectors And Cutting Attachments - Stihl FSA 130 Notice D'emploi

3 Overview
3 Overview
3.1 Brushcutter
3
#
1
2
5
6
7
8
1 Plug
The plug covers the socket and protects it
from moisture and dirt.
2 Socket
Receptacle for connecting cable plug.
3 Carrying strip
Perforated strip for suspending the carrying
system.
4 Control handle
The control handle is used for operating,
holding and controlling the brushcutter.
5 Retaining latch
The retaining latch unlocks the trigger switch
together with the trigger lockout. It is also
used to select the power level.
6 LEDs
The LEDs indicate the selected power level.
7 Trigger
The trigger switches the brushcutter on and
off.
8 Trigger lockout
The trigger lockout unlocks the trigger
together with the retaining latch.
9 Wing screw
The wing screw secures the handlebar to the
handle support.
10 Handlebar
The handlebar connects control handle and
handle with the shaft.
0458-726-9621-C
11
4
9
10
12
13
14
15
16
11 Handle
The handle is for holding and controlling the
brushcutter.
12 Shaft
The shaft connects all components.
13 Opening for stop pin
The opening for the stop pin accommodates
the stop pin.
14 Stop pin
The stop pin blocks the shaft while a cutting
attachment is being mounted.
15 Gear housing
The gear housing encloses the gearbox.
16 Screw plug
The screw plug closes the filler opening for
STIHL gear grease.
# Rating plate with machine number
3.2 Deflectors and Cutting Attach‐
ments
The illustrations show examples of deflectors
and cutting attachments. Approved combinations
are listed in this instruction manual,
1
2
3
4
1 Universal deflector
Protects user from flying debris and contact
with the cutting attachment.
2 Grass Cutting Blade
Cuts grass and weeds.
3 Brush Knife
Cuts brushwood.
4 Line Limiting Blade
Trims mowing line to correct length.
5 Skirt
Extends universal deflector for use with a
mowing head.
6 Deflector for Mowing Heads
Protects user from flying debris and contact
with the mowing head.
English
20.
6
4
7
9
5
10
8
25