Deflectors And Cutting Attachments - Stihl FSA 130 R Notice D'emploi

3 Overview
3 Overview
3.1 Brushcutter
2
1
7
#
3
4
5
2
6
1 Socket
Receptacle for connecting cable plug.
2 Control handle
The control handle is used for operating,
holding and controlling the brushcutter.
3 LEDs
The LEDs indicate the selected power level.
4 Release slide
Operated together with the trigger lockout to
unlock the trigger. It is also used to select the
power level.
5 Trigger lockout
Operated together with the release slide to
unlock the trigger.
6 Trigger
The trigger switches the brushcutter on and
off.
7 Carrying ring
For attaching the carrying system to the
brushcutter.
8 Loop handle
For holding and controlling the brushcutter.
9 Barrier bar
Maintains distance between operator's leg
and a metal cutting attachment.
10 Shaft
The shaft connects all components.
11 Opening for stop pin
The opening for the stop pin accommodates
the stop pin.
0458-725-9621-C
8
9
11
12
10
13
14
12 Stop pin
The stop pin blocks the shaft while a cutting
attachment is being mounted.
13 Gear housing
The gear housing encloses the gearbox.
14 Screw plug
The screw plug closes the filler opening for
STIHL gear grease.
# Rating plate with machine number
3.2 Deflectors and Cutting Attach‐
ments
The illustrations show examples of deflectors
and cutting attachments. Approved combinations
are listed in this instruction manual,
1
2
3
4
6
1 Universal Deflector
Protects user from flying debris and contact
with the cutting attachment.
2 Grass Cutting Blade
Cuts grass and weeds.
3 Brush knife
Cuts brushwood.
4 Line Limiting Blade
Trims surplus mowing line to correct length.
5 Skirt
Extends universal deflector for use with a
mowing head.
6 Transport Guard
Helps protect user from contact with metal
cutting attachments.
7 Deflector for mowing heads
Protects user from flying debris and contact
with the mowing head.
8 Mowing Head
The mowing head contains the mowing line.
English
20.
7
4
5
8
25