Fitting And Adjusting The Carrying System; Balancing The Trimmer - Stihl FSA 130 R Notice D'emploi

English
2
► Adjust the strap (1) so that the carabiner (2) is
about a hand's width below your right hip.
7.3 Using with AP Belt Bag with
Connecting Cable
7.3.1 Attaching the "Belt bag AP with con‐
necting cord"
1
2
► Open the Velcro® fastening on the strap (1)
and pull the strap (1) out of the ring (2).
► Feed strap (1) through belt (3).
3
1
► Feed strap (1) back through the ring (2) and
the belt (3).
► Close the Velcro® fastening on the strap (1).
► Push battery (4) as far as it will go into the belt
bag (5).
36
1
1
3
1
4
5
A short beep will sound.
► Secure battery (4) with the Velcro® fasten‐
ing (6).
7.3.2 Adjusting the Connecting Cable
The connecting cable can be fitted and adjusted
to suit the user's size and the application.
3
The length of the connecting cable can be adjus‐
ted by making a loop (1) and securing it to the
belt bag (3) with the fastener (2).
► Arrange the connecting cable so that it is as
short as possible without hindering your work.
7.3.3 Fitting and Adjusting the Carrying Sys‐
tem
► Put on the shoulder strap (1).
► Adjust the shoulder strap (1) so that the cara‐
biner (2) is about a hand's width below your
right hip.
7.4

Balancing the Trimmer

6
The cutting attachment should rest lightly on the
ground.
► Switch off the trimmer and pull the connecting
cable plug out of the socket.
7 Adjusting Trimmer for User
2
1
1
2
0458-725-9621-C