Setting The Centre Of Gravity - Reely SKY Thunder 500 ARF Notice D'emploi

k) Setting the Centre of Gravity
Turn the main rotor so that the two rotor blades
are parallel to the longitudinal axis of the helicop-
ter.
When the battery is installed, put one finger un-
der the left and right rods of the main rotor auxil-
iary paddles. Now lift the helicopter. The helicop-
ter must now be balanced horizontally. If this is
not the case, move the flight battery.
Use a marker (3) to mark the battery opposite to
the reference point (4) when the centre of gravity
is perfectly set. Thus, when you change the flight
battery, you do not have to determine the centre
of gravity again.
Important!
Always measure the centre of gravity with the cabin hood in place. Also ensure that the battery and its
cables do not block any movable parts.
46
All manuals and user guides at all-guides.com
Figure 10