Disposal And Recycling - Scheppach PL55Li Traduction Des Instructions D'origine

Information on the rechargeable battery packs
• Store in a dry, cool place at a temperature of 5 °C
to 25 °C.
• Protect rechargeable battery packs from moisture,
water and heat.
• Do not leave empty rechargeable battery packs
plugged into the charging unit for more than ap-
prox. one month, if the charging unit is disconnect-
ed from the mains. Danger of deep discharge!
• If Li-ion battery packs are stored without use for an
extended period of time, they should be charged to
40% capacity.

10. Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types
of material, such as metal and plastic. Defective com-
ponents must be disposed of as special waste. Ask
your dealer or your local council.
11. Trouble shooting
Problem Possible Cause
The motor does not Battery not inserted
run.
Battery not charged
Battery/device defective
Motor overheats easily Overload of the motor; inadequate cooling
of the motor
Decrease in cutting The saw blade is too small (sharpened too
power when sawing often)
The saw cut is rough or The saw blade is dull; the tooth shape is not
wavy suited to the thickness of the material
The work piece rips or The cutting pressure is excessive or the saw
splinters blade is not suited to the application
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical
and electronic equipment (WEEE). This product must
be disposed of at a designated collection point. This
can occur, for example, by handing it in at an author-
ised collecting point for the recycling of waste electri-
cal and electronic equipment. Improper handling of
waste equipment may have negative consequences
for the environment and human health due to poten-
tially hazardous substances that are often contained
in electrical and electronic equipment. By properly
disposing of this product, you are also contributing to
the effective use of natural resources. You can obtain
information on collection points for waste equipment
from your municipal administration, public waste dis-
posal authority, an authorised body for the disposal of
waste electrical and electronic equipment or your
waste disposal company.
Help
Insert Battery
Charge battery
Have battery/device checked/repaired by a spe-
cialist workshop.
Prevent overloading the motor when cutting; re-
move dust from the motor to ensure an optimum
cooling of the motor
Re-adjust the end stop of the saw unit
Re-sharpen the saw blade or use an appropriate
saw blade
Use the correct saw blade
GB | 23