Changing The Gas Supply - De Dietrich DTG 1138 Serie Guide D'installation Et D'utilisation

2 / INSTALLING YOUR APPLIANCE

CHANGING THE GAS SUPPLY

•
Note
The default settings on your hob are
for natural gas.
The injectors required for adapting the hob
to a butane/propane supply can be found in
the same plastic pocket as this guide.
Switching from natural gas to
•
butane/propane
During this operation,
, you must complete the following steps:
MADE
➊ Turn the gas changing switch.
❷ Adapt the gas connection.
❸ Change the injectors.
➍ Connect to the electricity supply.
➊ Turn the gas changing switch.
Your appliance is supplied by butane/propane.
You must flip the gas changing switch on the
right front of your hob to the butane position
(Fig. 01).
❷ Adapt the gas connector on the hob to
the new gas setting. Refer to the "Connecting
to the gas supply" section.
BEFORE ANY CONNECTION IS
Butane/Propane
Gas
Fig. 01
45
EN
Switch
Natural gas
Grid
Burner cover
Head
Crucib
Fig. 02